The gauge I used was a POS, with a high range, mine put out more than 10 but less than 15. On a side note, the other scan on the vag com brings up these problems.Īlso a note appears on the digital display on the dash that says "emissions workshop!"Īnyone have any suggestions or procedures to test these functions before pulling the injector? the actual electronic internals of the injector are bad. Now I only get P0269 and P0303 - cylinder 3 misfire injector imbalance. The car had the same symptoms but the codes changed. Next I removed a performance programmer that was put in by the previous owner. Then I removed the valve cover and did a quick visual inspection of the wires and cam shaft. I checked the in tank pump and looked at the injector wiring harness. The codes that originally came up were all the injector codesĮvery time the car is running and the codes are cleared it reverts back to a normal idle and then two seconds later goes back to rough with the codes reappearing. It starts fine then slips into a rough idle with no throttle response. I have a car for a customer, 05 Passat, in the shop.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |